Assembly instructions for transport castors
If you have opted for the transport castors, you can find the detailed assembly instructions here.
The mounting plate
The mounting plate with 4 fixing points is located on the underside of the SUPJAK base body.
Screws for mounting
The 2 small pan-head screws with the 10 mm long thread are used to fasten the axle.
Fitting transport rollers
The screws are screwed into the two lower fixing points and hold the axle in position.
Screws for the router bracket
The two attachment points for mounting the rudder bracket remain free.
Fitting the rudder bracket
The rudder bracket can then be attached as usual using the 2 Phillips screws.