Assembly instructions for steering

Here you can find the complete assembly instructions for our steering system.

Railblaza accessories

You need these two accessories + the steering for the conversion.

Unscrew the eyebolt

For preparation, the eye bolt must be unscrewed slightly so that it fits into the steering later.

Unscrew the screw

The screw must be unscrewed completely. (Caution: the lock nut may fall off in the process).

Connect eye bolt with steering

Insert the Railblaza adapter into the steering. Then reinsert the steering screw and ensure that it is guided through the hole in the eye bolt.

Tighten the screw

Screw the steering bolt back into the lock nut.

Tighten the Railblaza adapter

Now tighten the adapter by hand in a clockwise direction until it is firmly attached to the steering.

Use Railblaza Startport

Now insert the Railblaza StarPort into the rail of the seat.

Pull Railblaza start port tight

After inserting the StarPort, tighten the screws clockwise. When doing so, lift the StarPort slightly so that the clamps jam better.

Insert the steering into the Railblaza start port.

The steering can then be plugged into the Railblaza Startport 45° and mounted anywhere on the rail system. You can also mount the adapter on the other side if you want to steer with your right hand.